Landscape Lighting Installation in Tarrant County

Best Landscape Lighting Installation in Tarrant County

Landscape lighting does more than highlight your home; it enhances security, improves safety, and creates a welcoming atmosphere after dark. At Ellis Landscape Services, we design and install custom low-voltage lighting systems that blend function and beauty for Tarrant County properties. Each layout is tailored to showcase architecture and planting, make walkways safer to navigate at night, and extend the comfort of patios and gardens.

What we light

Path and Walkway Lighting

Safely guide family and guests while reducing trip hazards. We space fixtures for even pools of light, use shields to reduce glare, and set heights that illuminate surfaces without shining into eyes or windows.

Accent and Uplighting

Create dramatic curb appeal by highlighting trees, stonework, and key architectural features. Beam angles and lumen outputs are chosen for each target so trunks, canopies, and textures read clearly without hot spots.

Deck, Patio, and Pergola Lighting

Extend outdoor living hours with integrated step, post, and under-cap lighting for warm, comfortable ambiance. We zone dining, lounge, and cooking areas so you can brighten activity zones and dim relaxation spaces.

Security Lighting

Increase visibility at entries, driveways, and side yards with discreet fixtures aimed for coverage rather than glare. Motion or schedule controls improve safety while keeping the look refined.

Custom Lighting Designs

Every plan is site specific. We balance vertical and horizontal light, layer techniques for depth, and coordinate finishes and color temperature so the system complements your home and landscape.

How we design

• Warm color temperature in the 2700–3000K range for natural tones on stone, siding, and foliage
• Glare control using shields, louvers, and precise aiming to keep light on target
• Layered techniques such as grazing, washing, and silhouetting to add depth and interest
• Zoning and dimming so patios, paths, and focal trees can be controlled independently
• Dark-sky awareness with downlighting where possible and tight beam control to minimize spill

Installation standards

• Durable, energy-efficient fixtures in brass or architectural-grade aluminum with sealed optics
• Proper wiring methods using hub or T-connections, waterproof gel connectors, and correct burial depth to limit voltage drop and simplify future service
• Sized transformers with surge protection, secondary breakers, and clean labeling for each zone
• Code-compliant power on GFCI-protected circuits with neat conduit runs where required
• Clean finishes with concealed fixtures and restored mulch or turf for a tidy result

Maintenance and care

• Periodic lens cleaning and re-aiming after storms or seasonal growth
• Voltage and load checks to keep brightness consistent as the landscape matures
• Quick replacements for any damaged fixtures or chewed wiring
• Optional annual service plans that keep everything looking crisp year-round

From planning and placement to wiring, controls, and ongoing care, Ellis Landscape Services delivers landscape lighting that is beautiful, safe, and built to last.

Our Outdoor Lighting Services

Pathway Lighting

Safe, well-lit walkways and driveways that prevent trip hazards after dark

We place light on the walking surface, not in eyes or windows. Fixtures are spaced to create overlapping pools of illumination along sidewalks, entries, driveways, and garden paths. Heights and aiming clearly define edges, steps, and grade changes so guests can navigate confidently at night.

Energy-efficient, low-voltage LED systems for long-lasting performance

Systems use low-voltage transformers and high-efficiency LEDs for consistent brightness with minimal energy draw. We size transformers for current and future load, balance wire runs to reduce voltage drop, and select warm 2700–3000K color temperatures for natural tones on stone, siding, and foliage.

Weather-resistant fixtures built for Texas heat and storms

Brass or architectural-grade aluminum housings, sealed optics, UV-stable finishes, and stainless hardware deliver durability. Waterproof connectors, correct burial depth, and accessible junction points keep performance reliable through summer heat, heavy rain, and seasonal wind.

How we design your pathway lighting

• Fixture styles matched to your architecture: modern bollards, classic path lights, recessed step or paver lights that blend with your home and hardscape.
• Glare control: internal shields and louvers keep light on paths and steps, not into eyes or windows.
• Layered layout: staggered spacing ties paths to entries, driveways, and focal beds for a continuous, welcoming route.
• Zoning and dimming: brighter levels for high-traffic routes, softer levels for garden paths; preset scenes for “Evening,” “Entertaining,” and “Late Night.”

Installation standards you can count on

• Hub or T-method wiring with gel-filled, waterproof connectors for reliable distribution
• Proper burial depth and neat conduit where required to protect wire runs
• Clean edges and restoration of mulch, turf, and hardscape joints after install
• Labeled transformer taps and circuits for simple future service

Maintenance made simple

• Periodic lens cleaning and re-aiming after growth or storms
• Load and voltage checks to keep brightness uniform as the landscape matures
• Quick replacement of any damaged fixtures or chewed wire with matching components

Where pathway lighting shines: entry walks, front approaches, garden paths between beds, driveway borders, and step transitions. It provides form and function, often paired with landscape design to emphasize bed lines, frame entryways, and guide the eye to focal features.

Accent & Architectural Lighting

What it does

Creates depth and drama after dark, drawing attention to specimen trees, textures, and the architectural lines that make your home unique.

What we highlight

• Mature trees and multi-trunk forms
• Stone, brick, and textured siding
• Water features, sculptures, address walls, and entry columns
• Gables, dormers, and façade details

Techniques we use

• Uplighting: narrow beams for trunks and columns, wider beams for canopies
• Grazing: fixtures 12–18 inches from stone or brick to reveal texture with shadow
• Washing: soft, wide beams for even illumination on smoother walls
• Silhouetting and shadowing: backlighting or aiming through foliage for striking outlines and patterns
• Cross-lighting: two softer angles to reduce hot spots and reveal form
• Downlighting (moonlighting): elevated fixtures for natural, overhead light

Security & Motion Lighting

Purpose and approach

Increase visibility at entries and around the perimeter while discouraging trespass. We design for coverage without glare, pairing low-level ambient light with motion “boost” so sightlines are clear when needed and comfortable the rest of the time.

Strategic placement

• Entries and garages: down-aimed fixtures that illuminate thresholds and driveway aprons
• Driveways and side yards: full-cutoff floods or downlights aimed to cover paths and vehicle areas without shining into neighbor windows
• Gates and rear elevations: targeted fixtures at fence gates, patio doors, and service yards

LED Lighting Benefits

Energy Efficient

LED systems use far less electricity than legacy incandescent or halogen fixtures while delivering bright, even illumination. Lower wattage per fixture means smaller transformer loads, fewer circuits, and the ability to run more lights on the same power supply. Warm 2700–3000K color temperatures provide a natural look on stone, siding, and foliage without the harsh blue tint of older LEDs.

• Lower monthly utility costs
• Consistent brightness from the first hour to the last
• Capacity to expand later without replacing your transformer

Low Maintenance

LEDs are solid-state, so they resist vibration and frequent on–off cycling. Professional-grade housings in brass or architectural aluminum protect sealed optics from moisture and dust, while UV-stable finishes hold up to sun exposure. With lifespans measured in tens of thousands of hours, you replace components far less often.

• Fewer ladder trips and service calls
• Weather-ready fixtures for North Texas heat and storms
• Stable performance that keeps your property looking polished year-round

Customizable

LED technology offers precise control over look and feel. Choose warm, inviting tones for entries and patios or slightly brighter neutrals where visibility matters. Interchangeable optics and beam spreads shape the light for paths, trees, walls, or architectural details.

• Multiple color temperatures and high CRI for accurate color rendering
• Adjustable beam angles and outputs to avoid hot spots and glare
• Independent zones for paths, façades, and gathering areas

Smart Integration and Scheduling

Modern LED systems pair easily with photocells, timers, and app-controlled smart transformers. Set schedules that align with sunset, create scenes for different occasions, and receive alerts if a circuit draws unexpected load.

• App access for scenes, dimming, and vacation modes
• Dusk-to-dawn automation with optional motion-boost where you want it
• Simple adjustments as seasons and landscaping change

Why Choose Ellis for Outdoor Lighting?

Creative Lighting Designers

Our team creates custom layouts that enhance beauty, functionality, and security. Every design is tailored to highlight your property’s best features while solving practical needs like safe walkways and clear visibility.

• Site-specific plans that consider architecture, trees, paths, and views
• Layered techniques: path lighting, uplighting, washing, grazing, and downlighting
• Warm, comfortable color temperatures (typically 2700–3000K) with high color accuracy
• Glare control using shields and louvers, plus dark-sky friendly aiming where appropriate
• Zoning and dimming so patios, entries, and garden paths can be controlled independently

Top Brands Used

We install high-quality, professional-grade fixtures and transformers from trusted manufacturers for long-term reliability in North Texas conditions.

• Cast brass or architectural aluminum fixtures with sealed optics and UV-stable finishes
• Efficient LEDs, interchangeable optics, and serviceable components for easy upkeep
• Properly sized, labeled transformers with surge protection and secondary breakers
• Hub or T-method wiring with waterproof connectors to minimize voltage drop and simplify service

Code-Compliant Installation

Safety and longevity guide every step of our work. Our licensed installers follow electrical codes and industry best practices for dependable performance.

• GFCI-protected power, grounded connections, and neat conduit runs where required
• Correct burial depth for cable, drip loops, and sealed junctions rated for wet locations
• Clean labeling of circuits and zones for simple future adjustments
• Nighttime aiming and final verification to ensure even illumination without hot spots

A Seamless, Worry-Free Process

1. Consultation and site walk to align goals and budget
2. Concept plan with fixture schedule, zones, and clear pricing
3. Professional installation with careful restoration of beds, turf, and hardscape
4. Night focus and hands-on walkthrough so you know how to use timers or app controls

“The right lighting brings your landscape to life, day or night.”

Serving:
Southlake • Westlake • Grapevine • Trophy Club • Keller • Flower Mound • Argyle • Roanoke and beyond

Schedule Your Free Landscaping Consultation

Whether you’re interested in a full landscape overhaul or simply need reliable lawn maintenance, Ellis Landscape Services is here to help. Let’s discuss your outdoor needs and create a plan that fits your vision and budget.

📞 Call us at (817) 709-9599 or Request a Quote Online today!